The SportRack Lock # SR0901 is a fit for the SportRack Ridge Swing 4 Bike Rack - 2" Hitches - Swinging # SR2415. It is a great choice to secure your rack and then I recommend using a cable lock like # e98891 to run through the bike frames and the chain loop of your trailer hitch. view full answer...
I recommend using the Curt # 13389 because of the quality of the powder coat on the Curt hitches compared to some of the other available hitches. This is a Class III hitch with a 2" receiver and is a confirmed fit on the 2007 Chrysler Town and Country models with the Stow-N-Go seats.
If you're going to be towing a small trailer with this hitch, you'll also need a wiring harness, ball mount and hitch ball. For a wiring harness I recommend using the Tekonsha T-One # 118300 because of the... view full answer...
We can get your 2014 Chrysler Town and Country set up for towing, starting with the trailer hitch receiver, and for that I recommend the etrailer Trailer Hitch Receiver # e98854.
This hitch is the best option for your '14 Town and Country because it has the best bumper clearance for your ball mount so you don't have to use the harder to find extra-long mounts, and because this hitch has a nice matte black finish which helps hide the scratches and dings compared to the glossy finish of... view full answer...
Thanks for providing as much information on your setup as you did. That makes my job very easy!
So your trailer at it's heaviest would be 3,500 lbs which would mean the tongue weight could range from 350 to 525 lbs. The part # FA92-00-0450 is most likely going to be not rated high enough as you also have to factor the weight of cargo behind the rear axle of your tow vehicle as tongue weight too. The part # FA92-00-0600 would be a better option as it has a tongue weight limit of 600 lbs... view full answer...
The # C21410 Curt Hitch Pin and Clip will work for your rear cargo trailer basket as long as you have a 1-1/4" hitch. This hitch pin is designed for 1-1/4" hitches and has a 1/2" diameter with a 2" span. This works for Class I and Class II hitches. If you need one for a 2" hitch you can use the # C21510 instead.
I have attached a review video for your reference. view full answer...
There is one ball mount that meets your criteria for 10 inches of rise as well as more than 7 inches of clearance from the hitch pin hole to the hitch ball:
- Draw-Tite Ball Mount # 80248
This ball mount will give you 9-3/4 inches of rise (that 1/4 inch is not a factor; you just need to be within an inch or so of level) and measures from 9 inches from the center of the hitch pin hole to the center of the hitch ball.
For a hitch ball, depending on your trailer's coupler you will need... view full answer...
To add a 7-Way trailer connector and retain the 4-Way you already have on your 2015 Chrysler Town and Country I recommend using # 37185 if you just want the lights to function on your Rpod. If the trailer requires 12 volt power for accessories and/or has electric brakes then I recommend using # ETBC7 instead and brake controller # 90885. I have included some links that show and explain the ETBC7 installation for you. view full answer...
There certainly is a way to install a brake controller in your 2016 Chrysler Town and Country but our brake controller manufacturers have stated that there is no brake controller pre-wiring in your vehicle so you'll have to hardwire it in.
Since you have a 7-Way you will only need a few more components to complete a brake controller install on your vehicle.
First let's start with a brake controller. I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling... view full answer...
Draw-Tite trailer hitch # 75579 will fit all models of the 2014 Chrysler Town and Country. There should be no bumper fascia trimming required. The only trimming mentioned in the instructions, linked to the right, is possibly on a mudflap. I have also included a link to a video showing a typical installation for you.
The Curt Hitch part # 13364 that you referenced would most likely require you to trim the fascia so I would not recommend it for you.
If you plan on doing some towing then... view full answer...
As long as you have a trailer hitch installed on your 2014 Chrysler Town and Country like the # e98854 yes the Thule DoubleTrack bike rack part # TH92BJ would fit and work really well. This is a very easy to install/load bike rack that you'll be really happy with!
I attached an install video for the hitch. view full answer...
We do offer oil, transmission and power steering coolers that are suitable for your 2008 Chrysler Town and Country. There are also dual-core combination coolers that can handle cooling of two separate fluids within one housing. These coolers are not vehicle-specific so essentially you can use a large a cooler as you can find space for it. We do not offer OEM replacement or aftermarket upgraded radiators.
Coolers are labeled with a Class rating; the higher the Class the better the cooling... view full answer...
According to the manual for the Jensen LED Television with DVD Player # JTV1917DVDC, which I have sent to you, the power consumption is 28 watts. This LED television is 19 inches, HD ready, and comes with a tabletop stand and wireless remote control. It also has a VESA 75mm x 75mm mounting pattern if you want to mount it on your wall. view full answer...
Yes, the CE Smith Roller-Style Guide-Ons part # CE27610 will fit your EZ Loader boat trailer. The brackets work with trailer frames up to 3" wide x 4-1/4" tall so your 1-1/2" wide x 4" tall frame will not be an issue. I have attached a sample install video for you as well. view full answer...
First let's start with a brake controller. I would recommend the Prodigy P2 Brake Controller part # 90885 that I believe you are considering already. This is our best selling brake controller because of how well it works and how easy it is to setup. We don't have a way to tie into factory 7-way wiring but we can still help you wire the controller up and make it functional.
Next, for a wiring kit to install the brake controller to the 7-way you would want the Wiring Kit for 2 and 4 Brake... view full answer...
The extension for the part # TH859XT is the part # TH8591XT. To fit this on your 2014 Chrysler Town and Country would require you to have a roof rack with crossbars that are spread between 20" and 37" apart. lf this is the case, the extension will work just fine.
I actually attached an install video that shows the # TH859XT installed on a 2014 Town and Country just like yours as well. In the video the van has the factory roof rack. view full answer...
The Rightline Sport 3 XL Rooftop Cargo Bag # RL100S30 will fit just about any vehicle roof regardless of whether or not it has hardware, side rails or crossbars.
If the Town and Country is equipped with a factory-installed roof rack then the crossbars are the self-storing type that fold into the side rails when not in use. I reviewed the owners manual for this vehicle and it does not specify the dimensions or spread of the crossbars (but I was able to verify that the roof weight capacity... view full answer...
Yes, the Thule Passage 3 Bike Carrier # TH911XT, will fit your 2010 Town and Country. This is Thule's entry-level trunk mount bike rack made with a steel frame, anti-sway cradles for the bikes and adjustable arms for ideal bike support. I've attached a review video of this bike rack for you to check out.
If you prefer the Thule brand, then I suggesting looking at the OutWay PRO 3-Bike Rack, # TH56BV. It comes with all the integrated locking features to keep your bikes and the rack itself... view full answer...
For your 2013 Chrysler Town and Country, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 which is a proportional controller. This will adjust the braking based on your deceleration as well as the brake light signal. This is our most popular controller due to the LCD screen with easy diagnostics and preset boost levels.
To make this functional with your vehicle and your current 4-way trailer connection, you will use the Universal Brake Controller Wiring Kit # ETBC7.... view full answer...
Per the installation instructions for the Curt Trailer Hitch, part # 13364 that you received for your 2014 Town and Country, the vehicle's existing hardware is used to install the hitch.
You need to make sure you do not misplace the hardware when removing it form your vehicle. Also, you will need a torque wrench like part # ALL944001 to tighten the hardware when installing the hitch.
If you are unable to find all of the hardware needed for installation, we do offer the hardware kit.... view full answer...
I'm assuming you're speaking of the Draw-Tite Class III, part # 75305. We don't publish the torque ratings, because the manufacturer can change them over time, but in the current instructions which I've linked for you, the torque specs for the existing M10 and M12 bolts are listed right after step # 4 of the installation instructions.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118300, a ball mount like # D-28 a hitch pin like # PC3 and a # 19260... view full answer...
Go To Results